Haan HS-20 user manual Grounding Instructions

Warning

DO NOT modify the plug. Improper connection of the equipment-grounding conductor can result in a risk of electrical shock.

IMPORTANT

Use regular tap water, or if the tap water in your area is hard, we recommend you use distilled/purified water. Always empty water from water tank after use.

18.To refill the product with water during use, follow the directions on pg 8. Unplug the product before attempting to add water.

19.The product and accessories become hot during use. Exercise care when changing accessories and follow removal/changing instructions as outlined in manual.

20.Use only manufacturer’s recommended attachments

—use of attachments not provided, approved or sold by HAAN may cause fire, electric shock or injury and

will void warranty.

21.If the circuit breaker activates while using the steam function discontinue product use immediately and contact the customer support center (Beware of the risk of electrical shock.) To avoid circuit overload, do not operate another appliance on same circuit as the steam cleaner.

22.do Not allow the product to be disassembled and/or modified by anyone other than an authorized HAAN service technician. Doing so can result in fire and/or electrical shock and would void warranty.

23.To provide continued protection against risk of electric shock, connect to properly grounded outlet only.

Grounding Instructions:

The HAAN HS-20 must be connected to a grounded (3-prong)wiring system. Grounding provides a safe path of least resistance for electrical current, in the event the unit should malfunction or break down, thereby reducing the risk of electrical shock. The cord for this product has an equipment-grounding conductor and a grounding plug. Do not plug it into an outlet that is not properly installed and grounded in accordance with all local codes and ordinances.

Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit and has a grounding attachment plug as illustrated below. Make certain that the appliance is connected to an outlet having the same configuration as the plug. This is a safety feature — do not defeat attempt to defeat the safety purpose of this grounding pin. No plug adapter should be used with this appliance.

Grounded Pin

Grounded Outlet

If an extension cord is absolutely necessary, an extension cord rated a minimum of 15 ampere

14 gauge cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so it cannot be pulled or tripped over.

www. haanusa . com 877 - HAAN DIRECT / 877 - 422 - 6347 pg 3