Haan SI-35 instruction manual Before Using Your Floor Sanitizer

1.Handle

2.Pole

3.Power Indicator Light

4.Steam Power Switch

5.Storage Hook (rotates 360º)

6.Power Cord Organizer (bottom)

7.Power Cord

8.Water Tank Release Button

9.Detachable Water Tank

10.Floor Protector / Resting Mat

11.Carpet Glide

12.Ultra-Microfiber Pads (x2)

13.Fresh Rinse Lime & Scale Remover (x12)

Helpful Hint:

To extend the life of your Ultra-Microfiber Pads, always place your unit on the floor protector/resting mat while the unit heats up. Attach the Ultra-Micro- fiber pad when the unit is ready to use.

Helpful Hint:

When using the Floor Sanitizer with the Carpet Glide it will not lift all set-in stains from your carpet. Our patented Ultra-mi- crofiber pad may be used to act as a “blotter” for removing most fresh, wet spills and stains.

Before Using Your Floor Sanitizer

Be sure to read ALL instructions and warnings before using your Floor Sanitizer.

Warning

Your floor sanitizer is designed to clean hard floor surfaces that will withstand high heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no-wax floors, the sheen may be removed by the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend that you check the use and care instructions from the floor manufacturer.

Helpful Hint:

When heated, never leave the ap- pliance in one spot on any surface for any period of time. Always place your Floor Sanitizer on the Floor Protector/Resting Mat when stationary.

Helpful Hint:

Always empty water from water tank after use. To ensure opti- mum product function use Fresh Rinse™ once a month.

7