Hafler IRIS COMPACT DISC PLAYER owner manual Operation, Connections, Remote Control, Audio, Power

WARNING- Never allow the player to stand for long periods in direct sunlight or near any heat source.

CONNECTIONS

REMOTE CONTROL

The IRIS CD has two recessed male connectors on the back panel . They are internally connected together to allow the IRIS digital data-bus to “daisy-chain” to other IRIS-compatible accessories.

Connect either end of the supplied ribbon-type umbilical cable to either of the CD’s connectors. Note that both of the cable’s connectors are keyed, and therefore fit only one way. Be sure to insert the plugs fully. Connect the free end of the cable to the connector on the rear of (either) the IRIS Preamp or IRIS Tuner.

AUDIO

Output Right/Left: For the signal output to the preamplifier. Connect a standard RCA-type patch cord from the right and left outputs into the corresponding CD input jacks of your IRIS preamplifier.

Digital: For digital output signal to an outboard Digital to Analog (A/D) converter.

POWER
For	AC	line	(mains)	power. Make	sure	the	line voltage on
the	rear	of	the unit	is appropriate	for	your	location.

OPERATION

EXPLANATION OF KEYS (Refer to Figure 1)

1. POWER button

For switching on and off.