Manuals / Hafler / Home Audio / Stereo Amplifier

Hafler P7000 manual Signal, Clipping, Thermal, Short

Models: P7000

1 24
Download 24 pages 62.39 Kb
Page 9
Image 9

GROUND SWITCH

Ground loops are characterized by a hum or buzz through the speakers and are caused by a voltage potential difference between two points in a ground circuit. Ground loops are aggravated when multiple paths exist for a given circuit. Mounting components in a rack with metal rails may introduce ground loops between associated equipment, because the rails can establish an additional ground path. The CHASSIS/FLOAT switch allows you to select the amplifier grounding scheme for best system compatibility. With the switch in the CHASSIS position all signal grounds are referred to the chassis and power line ground. In the FLOAT position the signal ground is decoupled from the chassis. The position of the switch is determined by the overall noise in the system; choose the position which gives the lowest hum.

SHORT CIRCUIT PROTECTION

The self-protecting properties of the output power MOSFETs eliminates the need for sonically degrading voltage and current limiting circuits. To protect the amplifier from problems which may occur in the speaker line, there is an overload detection circuit. In the event of a short in the speaker load or cables, the detection circuit will shut down that channel and light the front panel SHORT indicator. If this happens, correct the fault and turn the amplifier off, then back on to reset the short detector.

LED INDICATORS

Amplifier operation is monitored internally and each channel has four status LEDs. These indicators can be used for system troubleshooting in case of aberrant behavior.

Signal

Monitors the amplifier output and lights when a signal is present. The SIGNAL indicator is calibrated to activate an equivalent input voltage of 30mV, with the amplifier set for full gain.

Clipping

Monitors the DRIVE SIGNAL and lights when the drive signal voltage exceeds the maximum level for linear operation of the output MOSFETs.

Thermal

Indicates when the thermal protection has shut down the amplifier. This occurs when the heatsink temperature becomes excessive.

Short

Indicates when the output overload monitor detects a potentially damaging short and shuts down power to the shorted channel. After clearing the fault, restore normal operation by turning the power switch off, then on again.

WARM UP

In order to achieve the best sonic performance and image stability from the amplifier, we recommend letting it warm up for 1 hour before beginning any critical listening.

CLEANING AND MAINTENANCE

There is no requirement for regular maintenance on the electronic components of the amplifier. If the case becomes soiled it can be cleaned using a soft cloth and a mild detergent, such as spray window or glass cleaner. If the amplifier is located in a particularly dusty environment cleaning the inside with compressed air or vacuuming every 18 to 24 months is sufficient.

– 5 –

Page 8 Page 10
Page 9
Image 9
Hafler P7000 manual Signal, Clipping, Thermal, Short
Page 8 Page 10

P7000 specifications

The Hafler P7000 is a professional power amplifier renowned for its robust performance and reliability in live sound and studio applications. A cornerstone of the Hafler brand, the P7000 embodies advanced technology and engineering, making it a popular choice among audio professionals.

One of the standout features of the P7000 is its high power output. It delivers up to 700 watts per channel at 4 ohms, providing ample headroom for demanding audio environments. This powerful output makes it suitable for driving large loudspeakers or multiple speaker systems, ensuring clear and dynamic sound reproduction even at high volumes.

The P7000 utilizes a class AB amplifier design, combining the benefits of class A and class B architecture. This design choice ensures low distortion levels while maintaining efficient operation. As a result, users can expect a warm and natural sound with low signal degradation, making the amplifier ideal for critical listening environments.

In terms of build quality, the Hafler P7000 is constructed with durability in mind. The chassis is made from robust materials that can withstand the rigors of frequent transport and use in various settings, from professional studios to live concert venues. Additionally, the amplifier features a well-ventilated design, minimizing overheating and ensuring reliability during extended operation.

The P7000 also includes advanced protection circuitry to safeguard against overload and short circuits. This feature not only protects the amplifier itself but also the connected speakers, providing peace of mind during high-energy performances. Furthermore, the amplifier incorporates a soft start circuit, which gradually ramps up power to the speakers, preventing sudden jolts that could cause speaker damage.

Connectivity is another key aspect of the Hafler P7000. It offers a variety of input options, including XLR and 1/4" TRS connectors, making it compatible with numerous audio sources and easy to integrate into any existing setup. Balanced inputs help reduce noise and interference, ensuring clean signal transfer over long cable runs.

With its combination of powerful output, reliable performance, and versatile connectivity, the Hafler P7000 stands out as a professional-grade amplifier. Whether used in a studio setting or live sound application, it provides audio professionals with the tools they need to achieve exceptional sound quality and consistency.