Haier 0090502138 DVD System Setup, General Setup Page

SETUP

DVD System Setup

General Setup Process

1.Press the SETUP button, the

General Setup Page, Preference

Page will be displayed in turn.

2.Press CH+/- b to select, the

item, then press to enter the

submenu.

3.Press CH+/- bu to select then

press OK to confirm.

4.Press SETUP repeatedly to

exit the set-up menus.

or

General Setup Page

When using the DVD with the internal TV,

select 4 3/LB.

The following information applies only

when the DVD output is connected to an

external TV.

4 3/PS (PS = Pan and Scan)

You may select this if you have a normal

aspect ratio (4:3) TV, although the NORMAL

/LB (letter box) is a more common choice. In

PS mode, widescreen material will fill the screen, but at the expense of

chopping off extreme left and right edges of the original film picture. For this

feature to work, the disc must be specially coded. Such discs are uncommon.

4 3/LB (LB = Letter Box)

You may select this if you have a normal aspect ratio (4:3) TV. Widescreen

material will be shown in pure unaltered form, allowing the entire picture area

of the original film to be viewed without any side cropping. Black bars will

appear above and below the picture.

16 9

You may select this if you have a widescreen (16:9) TV. Back bars may still

appear above and below the picture even if using a widescreen TV. This is

because some film directors prefer to use ultra widescreen aspect ratios e.g.

2.35:1. This will normally be indicated on the DVD packaging.

ASPECT RATIO DESCRIPTION

..General Setup Page..

Tv Display 4:3 LB

Angle Mark On

Osd Lang ENG

Caption On

Screen Saver Off

4 3/Ps

4 3/Lb

16 9

PAL

AUTO

NTSC

..Preference Page..

TV Type

Parental

Password

Default

Auto

..General Setup Page..

4 3/Ps

4 3/Lb

16 9

Tv Display 4:3 LB

Angle Mark On

OSD Lang ENG

Caption On

Screen Saver Off

Hdcd Off

Last Memory On

PLAY

SETUP

PLAY