![](/images/new-backgrounds/1293520/29352015x1.webp)
Install the water inlet hose
1.Attach the water inlet hoses to the water faucet. Using pliers, tighten the coupling. ( As figure 1)
NOTE: Do not over tighten. Damage to the valves can result.
Reserve, remain time digitron
It displays
It displays remained reserve time (hour).
It displays total remained time (min).
It displays abnormal symbol in abnormal situation. (See to Page15)
"Power" button
Push the "power" button to switch on the power. Under
2. Connect the other ends to the water inlet valve .
( As figure 2) | Figure 1 |
| |
| Jointer of the water inlet hose |
Jointer of the |
|
water inlet valve | Figure 2 |
| |
Water absorption cushion |
|
Reserve
42L | 45L | |
|
|
|
|
|
|
36L | 39L | |
|
|
|
|
|
|
29L |
| 32L |
|
|
|
22L | 26L | |
|
|
|
|
|
|
14L |
| 18L |
|
|
|
Water level
| carpeting |
| Standard |
| Air dry |
|
|
|
|
|
|
| Fibre |
| Save |
|
|
|
|
|
|
|
|
| Wool |
| Superfast |
|
|
|
|
|
|
|
|
| |
me | Air |
Progra |
|
Power
"Air-Dry"button
Push the
at the same time can dry the outer tub and the inner tub , which can avoid growing mildew on the outer tub and the inner tub.
The max drying capacity of the fibre laundrie is 1.5 kg.
"Reserve" button
The digitron displays remain time before washing is finished (in minutes)
Push "reserve" button, the digitron displays the reserve time of washing (in hours). The indicator flashes to indicate that the reserve function
is operating.
Push "reserve" button to display the reserve mode.
"Water level" button
The washing machine can detect the laundries automatically in standard program.
After detection,it will set the water level to suitable value among 4, 6, 8,and 10 automatically.
You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push the start/pause button to make new setting.
If there's water inside the tub, the machine cannot detect the laundries and will display water level 32L .
If wet laundries are put in, it may display water level 45L . You must set suitable water level by yourself.
If superfast program is selected, it will display water level 22L . When water level 18L is reached in water filling, it will perform washing while filling water.When water level 22L is reached, it will change to normal washing.
During operation of wash and rinse program, you can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water.
The water level decided may be different from actual value because of the different moisture level of the laundries.
"Program" button | ||
Following | ||
|
| |
Program | Application | |
Standard | Common washing |
|
|
| |
Save | washing for | |
Superfast | Washing for | a few laundries |
|
| |
| washing for carpet or heavy thickness | |
Carpeting | and damnify large | |
| under 3kg |
|
Fibre | washing for fibre | laundries |
| For silk textiles |
Wool
usually under 2.5kg
Remark:
If you want to wash wool silk or other top grade laundries ,please select wool program