Connection
Connection
Antenna (RF) Connection
Power Cord Connection
RF
Coaxial Antenna Cable
Press the INPUT button on the remote control to display the input source menu, use the CH
Ĥĥ
buttons to select
TV
and then press the OK
- Connect the TV to a wall outlet using the included AC power cord.
- When you connect the power cord, the TV enters
into standby mode and the LED indicator
on the front of the TV will be red.
- Turn on the TV by pressing the POWER ro VT n theo nottub remote control, and the LED
indicator will be turn off.
Wall jack with F-Connector
External Antenna
11
Note: It is recommended to unplug the TV if it will not be used for a long time, such as
during a vacation.
button to confirm.You will need to perform a
channel scan to be able to view TV channels. Please see the auto scan section on page 17.
AC POWER IN
HDMI2(MHL) HDMI3 USB RF IN