Introduction
Introduction
1. Front View
1). (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press POWER to turn on and off.
Indicator on(Red) Standby mode
Indicator off Power on mode
2).
The functions of the buttons:
INPUT: Press to show the input source list. Use the up and
down arrow keys to select a source, and then press
the VOL + key.
MENU: Press to display the OSD (on screen display) menu,
press again to exit the menu.
VOL+/-: Press to adjust the volume. In the OSD menu, use
the VOL+/- buttons to move right/left.
The effective receiving range for the signal is up to 26 feet from the front of the remote
control window, and 300 to the right side and 200 above or below the remote control
window.

Led Indicator

Remote Control window

(Keep clear)

POWER/STANDBY: Turn on/off (standby) the TV set.
CH / : Press to scan through channels. In the OSD
menu, use the CH /\ / \/ buttons to move up/down.
6