About the fridge storage compartment
Use of the foldaway shelf
Fig. 
shows the extended state of the foldaway shelf in which you can put lower food containers.
Fig. 
shows the folded state of the foldaway shelf in which you can put higher food containers.
To fold the shelf from state 
to state 
, simply push structure A upwards, and push structure B inward in the direction of the arrow shown in the figure.
To extend the shelf from state 
to state
, push structure A upwards, and pull structure B in the direction of the arrow shown in the figure.
Use of the wire wine holder
Fig. 
shows the folded state of the wire wine holder. In this state large space can be spared.
Fig. 
shows the extended state of the wire wine holder. In this state it can hold various wines.
To extend it from state 
to state
, simply pull the wire down.The maximum load of the bottle holder is 10 kg.
To fold it from state 
to state 
, simply push the wire up.
make sure to keep the two ends of a shelf on the same level.
Otherwise it may fall or the food on it may dump.
Note
Recommended storage areas for various foods As cold air circulates inside the refrigerator, there is temperature difference inside the fridge storage
compartment. Different foods should be placed in 
different areas according to their properties.
Eggs, butter, cheese and etc.
Drinks, canned food and etc.
Seasonings and pickled food
Beverages, canned food, cake, etc.
Wine, champagne, etc.
Milk, cheese, etc
Cooked meat, fresh fish and meat, etc. Fruit, vegetables, salad, etc.
Lamp in the fridge storage compartment and its replacement
Parameters of the lamp: 12V, max 5W(the power depends on the model). The lamp adopts LED as its light source, featuring low energy consumption and long service life. If there is any abnormality, please contact the
17
