English

Steps to Door Reversal

1.Remove lower toe kick (Front cover)

2.Remove plastic plug in the center if hinge cover (#3)

3.Remove screw from center of hinge cover (#2)

4.Remove hinge cover (#3)

5.Remove Square cover on left (#1)

6.Loosen and remove all 3 screws from upper door hinge (#4 and #5)

NOTE: Hold door while loosing and removing upper hinge to prevent fall and Damaging door as well as bodily injury

7.Lift door and lay door flat on the door

8.Loosen and remove the screws that hold the plastic door closer attached on the door in place (#14 and #15)

9.Remove upper right hole plastic door spacer (#12)

10.Remove the small screw hole cap in place (#19)

11.Loosen and remove door magnet switch from bottom center of door (#16 and #17) and reattach it to the top center of door.

12.Loosen and remove the 4 screws that hold the bottom right door hinge in Place

13.Remove bottom right door hinge

14.Loosen and remove the screw that hold the plastic door closer attached to the bottom right door hinge (#10 and #11)

15.Attach and tighten plastic door closer removed in step 13 to the bottom left door hinge provided in the accessory bag inside unit

16.Attach and tighten the bottom left door hinge to the unit with the screws removed in step 8

17.Take door so handle is now on the right side as it is placed in front of you and lay flat on floor

18.Insert plastic door spacer removed in step 9 into top left hole of door

19.Attach the plastic door closer to the door removed in step 8

20.Align the bottom left hole on the door with the pin on the bottom left door hinge

21.Slide into place gently

22.Take upper door hinge removed in step 6

23.Align pin of upper door hinge with hole on the upper left if door

24.Take the 3 screws removes step 6 and attach them to the screw holes on the unit and tighten Note: Do not fully tighten yet

25.Make sure top of door is level with top of cabinet

26.Once level, fully tighten screws that hold upper door hinge in place

27.Replace upper hinge cover removed in step 4

28.Tighten hinge cover to unit with screw removed in step 3

29.Replace screw cover plug removed in step 2

30.Replace square cover removed in step 5 to top cover right screw holes

31.Replace the small screw hole cap removes in step 10

32.Attach and tighten toe kick (Front cover) to the unit with the screws removed in step 1

8

Page 9
Image 9
Haier BC100GS user manual Steps to Door Reversal

BC100GS specifications

The Haier BC100GS is a compact and efficient refrigerator designed to meet the needs of both residential and commercial spaces. This stylish unit is particularly favored for its practical size and versatility, making it an ideal choice for small kitchens, dorm rooms, offices, or even for use as a secondary fridge in a garage or workshop.

One of the standout features of the Haier BC100GS is its impressive storage capacity. Despite its compact design, it offers a generous 3.5 cubic feet of space, allowing users to store a variety of items, from beverages to snacks and groceries. The interior layout is thoughtfully designed with adjustable shelves, providing flexibility to accommodate taller items and different types of food storage.

The refrigerator uses innovative cooling technology, ensuring that food and drinks stay fresh for longer periods. The quick cooling system rapidly lowers the temperature within the compartment, which is especially beneficial when adding new items. This feature, combined with energy-efficient insulation, contributes to minimal energy consumption, making the BC100GS an environmentally friendly choice.

Additional features include a reversible door, which allows for flexible installation based on the user's space configuration. This is especially advantageous for smaller areas where door swing direction can be a limiting factor. Moreover, the unit operates quietly, making it suitable for any environment without causing disturbances.

The Haier BC100GS also comes equipped with a thermostat control, allowing users to easily adjust the temperature settings to their preference. This ensures optimal preservation of food and drink items, enhancing the overall user experience.

Furthermore, the sleek and modern exterior design, complete with a stainless steel finish, makes this refrigerator an attractive addition to any kitchen or workspace. Its compact size does not compromise style or functionality, proving that great design can thrive even in smaller appliances.

In conclusion, the Haier BC100GS combines practicality with advanced cooling technology, adjustable storage options, and stylish design. It is a reliable solution for those seeking an efficient and compact refrigeration option that does not sacrifice performance or aesthetics.