Haier DE65EM, DE45EM manual ,    

MM

CURRENT

HUMIDITY

SET

HrHUMIDITY





     

Power

2Check Filter Indicator

The "check filter" indicator will flash when the filter needs to be cleaned. Remove the filter, wash it, and put it back in. Press "Filter Reset." The "check filter" indicator will turn off.

Note: Make sure the filter is dry before replacing.

5

6Smart Dry

This setting compares the set humidity level with the actual humidity level and adjusts the fan speed automatically.

Signal

The bucket full audible signal can be turned on and off by pressing the SIGNAL button. The default setting is set in the ON position. When the bucket is full, the red BUCKET FULL indicator light will blink and the alarm will sound 5 times every 15 minutes.

To turn off the audible signal feature, press the SIGNAL button once, and the LED display will show “OF” for 2 seconds. In this setting, when the bucket is full, the BUCKET FULL indicator light will blink, but the audible alarm will not sound.

To reactivate the audible signal, press the SIGNAL button and the LED display to the left will show “ON” for 2 seconds.

Bucket Full Indicator

When the indicator light comes on, automatic flow control stops the unit.

Turn the unit off by pressing the POWER key. Check to see if the bucket is full. If so, empty it. If bucket is not full and indicator light is on, the bucket is not in the proper position. Remove and reinstall it.

9Current Temp/Timer Set Display

When the dehumidifier is runningit displays the current temperature.Press the timer key to program the dehumidifier to turn on or off automatically at a pre-deter mined time.

 Current Humidity/Setting Humidity Display Displays the current humidity level and adjusts the humidity to a desired level.

Setting Humidity Range: 40%RH~70%RH

Display Humidity Range: (LO)30%RH~(HI)90%RH