4.While holding the handle, insert the short end of the hex key into the upper hole and slightly rotate the hex key until it is engaged in the setscrew.

5.Using a clockwise motion, tighten the setscrew until it begins to contact the shoulder screw.

6.Repeat steps 4 and 5 to begin fastening the lower setscrew.

7.Once both setscrews have been partially tightened as outlined in the previous steps, fully tighten both the upper and lower setscrews.

IMPORTANT: When the screws feel tight, tighten them an additional quarter-turn. The handle is not properly installed without this extra tightening.

8.Open the refrigerator door and close the freezer door. Repeat steps 2 through 7 to install the other handle onto the freezer door with the setscrews facing the refrigerator.

9.Save the hex key and all instructions.

To Remove the Handles:

1.While holding the handle, insert the short end of the hex key into the lower setscrew hole and slightly rotate the hex key until it is engaged in the setscrew.

2.Using a counterclockwise motion, loosen the setscrew a quarter-turn at a time.

3.Repeat steps 1 and 2 for the upper setscrew. Gently pull the handle away from the door.

4.If necessary, use a Phillips screwdriver to remove the shoulder screws from the door.

Style 2 - Slide-on

PARTS INCLUDED: Door handles (2)

To Install the Handles:

1.Remove the handles, which are packed inside the refrigerator.

NOTE: To avoid damaging the handles, place them on a towel or other soft surface.

2.Place the handle on the shoulder screws, which are mounted on the freezer door. Apply firm pressure on the handle to slide it down onto the shoulder screws.

NOTE: Do not push the handle toward the door; this can damage the door. Apply only downward pressure.

3.Repeat the previous steps to install the refrigerator door handle.

4.Save all instructions.

To Remove the Handles:

1.Lift the handle directly upward, and pull it off of the door.

2.If necessary, use a Phillips screwdriver to remove the shoulder screws from the door.

NOTE: Some models have mounting brackets connected to the shoulder screws.

LocationRequirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) of space on each side and at the top. Allow for 1"

(2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave a 2" (5.08 cm) minimum space on each side (depending on your model) to allow the doors to swing open.

1/2" (1.25 cm)

2" (5.08 cm)

6

Page 5 Page 7
Page 6
Image 6
Whirlpool ED2KHAXVT, GSF26C4EXT LocationRequirements, To Remove the Handles, Style 2 Slide-on Parts Included Door handles
Page 5 Page 7

GSF26C4EXT, ED2KHAXVT specifications

The Whirlpool ED2KHAXVT and GSF26C4EXT are two prominent refrigerator models that embody a blend of modern technology and practical design, aiming to enhance the user's kitchen experience. These units offer a range of features tailored to meet diverse household needs, making them standout choices for consumers.

The Whirlpool ED2KHAXVT is a top-freezer refrigerator known for its spacious interior and efficient organization. With an impressive capacity of 21 cubic feet, it provides ample storage for groceries and meal prep, allowing users to easily store everything from large food items to smaller everyday essentials. This model features adjustable spill-proof shelves that are easy to clean and prevent messes from spreading, enhancing the user’s convenience.

One of the key technologies in the ED2KHAXVT is the Adaptive Defrost system, which monitors the compressor run time and only defrosts when necessary. This not only ensures optimal food preservation but also reduces energy consumption, making it an environmentally friendly choice. Additionally, the model includes a dual-temperature controlled crisper drawer, which is perfect for keeping fruits and vegetables fresh longer.

On the other hand, the GSF26C4EXT is a side-by-side refrigerator that offers both style and functionality. It features a striking stainless steel finish, contributing to a modern kitchen aesthetic. With roughly 25 cubic feet of total capacity, it boasts a well-organized interior with adjustable shelves and door bins, designed to keep items easily accessible. The water and ice dispenser located on the door provides instant access to cold water and ice, adding convenience for families and busy individuals.

The GSF26C4EXT incorporates innovative features like the Accu-Chill temperature management system, which uses sensors to regulate the internal temperature, ensuring optimal performance without compromising energy efficiency. Furthermore, the model is equipped with a FreshFlow produce preserver which effectively keeps fruits and vegetables fresh by controlling the ethylene gas levels within the refrigerator.

Both models come with energy-efficient ratings, making them cost-effective choices for daily use. Their thoughtful design and advanced technology cater to the needs of modern households, proving to be reliable appliances that stand the test of time. With versatile storage solutions and reduced energy consumption, the Whirlpool ED2KHAXVT and GSF26C4EXT excel in delivering performance and practicality, sealing their status as preferred selections for discerning consumers.
Top Page Image Contents