Installation | EN |
Positioning the appliance
Positioning the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.
Levelling the appliance
Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°. If the appliance is level, it will help ensure proper performance.
Cold water connection
Connect the water supply hose to a threaded 3/4 (gas) connec- |
|
tor, making sure that it is fastened tightly in place (see fig.A). |
|
If the water pipes are new or have not been used for an ex- |
|
tended period of time, let the water run to make sure that the |
|
water is clear and free of impurities. If this precaution is not |
|
taken, there is a risk that the water inletcan get blocked and |
|
damage the appliance. | fig. A |
Warning
The appliance is to be connected to the water mains using new hosesets and that old
3
