English

Instruction for use

If you cannot reach the plug, keep the oven door open (also when cleaning the outside).

Only in this way you can prevent the appliance from being switched on when the function keys or switches are inadvertently activated.

1. Cleaning the Cabinet

Caution ! Under no circumstances should water or a cleaning fluid get into the inside of the oven. This is particularly important when cleaning around the air vents or rear wall.

Otherwise serious accidents may ensue due to electric shock and the appliance may be damaged.

Only use clear water with just a little washing-up liquid for cleaning. Do not under any circum- stances use sharp cleaning or scouring agent. Lastly wipe the cabinet dry with a soft cloth.

Carefully remove food particles and dirt deposits between the door and cabinet, so that the door always shuts properly and tightly.

Warning !

Under no circumstances should you continue to use the appliance if you have detected any damage on the door seal or on the adjoining surfaces.The same applies to damage detected on the door itself or door hinges. Otherwise hazardous microwave radiation may escape from these locations.This kind of dam- age must be repaired by a trained customer service engineer, before you can use your appliance again.

2. Cleaning the inside of the oven

Never pour water into the oven interiors. Water may enter the interior of the oven through the air vents and damage the appliance. Moreover serious accidents can ensue due to electric shock.

Clean the oven interior thoroughly. Particles of fat and food may overheat and potentially cause fire hazard. Moreover food and dirt deposits inside the oven affect the performance of the microwave oven. Use only clear water with a little washing-up liquid to clean the interior of the oven. Do not under any circumstances use sharp cleaning or acids. Lastly wipe the cooking chamber dry with soft cloth.

3. Cleaning the Turntable

Thoroughly clean the turntable (if equipped with) after every use to prevent smoke from developing due to food particles.

CAUTION ! The turntable might still be hot.

Likewise clean the turntable undercarriage and the oven interior regularly, so that it always works perfectly.

9 Customer Support Service

Check on the enclosed guarantee card or the separately enclosed customer service directory which firm is responsible for the customer support service of your appliance.

If your appliance documentation does not mention the responsible customer support service, please contact your dealer.

If your appliance does not work despite observance and compliance with all tips and guidelines de- scribed in these instructions for use, then please do the following check "What is when...", before you call the customer support service:

EnglishInstruction for use

When operating the microwave oven for the first time, make sure that:

The power cable of the oven is not led underneath the oven base, which does get hot, and does not come into contact with sharp edges or hot objects.

The power cable does not extend into the other kitchen work areas.

The power cable does not droop from the work top and nobody can get caught in it.

The power cable does not come into contact with moisture(e.g. when wiping the work top or rinsing).

The power plug is easily accessible and can quickly be unplugged in case of danger. .

The power plug is always firmly inserted in the socket and loose contact cannot cause any fire hazards.

Slack power plugs or sockets must be immediately repaired by a skilled electrician.

No curtains are nearby.

6 Using the Microwave Oven

1. Before switching on the appliance, you should familiarizes yourself with the following guidelines:

Never operate the oven when it is empty.

Otherwise it could get damaged.

To prevent the oven from being operated inadvertently without contents, always leave a glass of water in the cavity when the appliance is out of use.

Never heat liquids or food(s) in sealed dishes

Within sealed dishes overpressure can quickly develop and thus cause the dish to burst.This leads to potentially serious accidents.

The following items are also liable to burst due to developing overpressure: eggs in shells, nuts in shells or any food(s) vacuum packed in plastic foil.

Therefore, always pierce raw eggs on two sides and remove the foil or at least cut it open on one whole side, before you put it into the oven. Remove nutshells.

Should the use of aluminium foil be recommended in a recipe, make sure that it tightly adheres to the cookware or food and a gap of at least 2.5 cm is left between the aluminium foil and the cooking compartment walls.

Otherwise sparking may occur inside the oven and the appliance could consequently get damaged.

In order to ensure that the seal is constantly protected adequately against hazardous escap- ing microwaves, always make sure that:

a)No objects (dishcloths, parts of food packaging etc.) are caught between the door and cabinet

b)Door seal or door hinges are not damaged or soiled (also see section on "Cleaning and Care").

Do not touch - Scalding hazard

During operation your microwave oven may present scalding hazards in the following components: on the door - glass panel

on the lateral air vents

on the underside of the oven

2. Prevention of smoke or fire in the microwave oven

8

5

Page 7
Image 7
Haier EA-1770MG manual Customer Support Service, Using the Microwave Oven

EA-1770MG, EA-1770M specifications

The Haier EA-1770M and EA-1770MG are advanced air conditioning models designed to provide efficient and effective cooling solutions for various spaces. Known for their reliability and modern features, these models embody Haier's commitment to innovation and customer satisfaction.

One of the standout features of the EA-1770M and EA-1770MG is their energy efficiency. Both models are equipped with advanced inverter technology, which allows them to adjust their cooling output based on the ambient temperature and user settings. This not only helps in maintaining a consistent indoor climate but also significantly reduces energy consumption, resulting in lower electricity bills.

The design of these air conditioners is both sleek and functional. With a compact form factor, the EA-1770M and EA-1770MG can easily fit into various room sizes without being an eyesore. Their modern aesthetics pair well with contemporary interiors, making them an attractive addition to any space.

In terms of cooling capacity, these models are designed to provide powerful performance. They utilize high-efficiency compressors that deliver rapid cooling, ensuring that spaces reach a comfortable temperature in a short amount of time. Both models are suitable for residential and commercial applications, making them versatile choices for users.

User-friendly features are also a highlight of the Haier EA-1770M and EA-1770MG. The units come with programmable timers and customizable settings, allowing users to set their desired temperatures and cooling schedules. This level of control enhances convenience and improves overall user experience.

In addition, these models are equipped with advanced filtration systems that enhance indoor air quality. The air filters effectively capture dust, allergens, and other airborne particles, ensuring a cleaner environment for occupants. This feature is particularly beneficial for allergy sufferers and families with children.

Furthermore, the Haier EA-1770MG is designed with smart technology integration. Users can control and monitor their air conditioner remotely through a dedicated smartphone app. This connectivity feature adds another layer of convenience, allowing users to adjust settings even when they are not at home.

Overall, the Haier EA-1770M and EA-1770MG represent a blend of performance, efficiency, and modern technology, making them excellent choices for anyone looking to enhance their indoor comfort. With their effective cooling capabilities and user-friendly features, these air conditioners stand out in the competitive HVAC market.