Haier air conditioner | Edition: |
|
|
5. Installation and Accessory Parts
Check the following before you install your air conditioner:
1)The unit is free of all obstructions inside and outside the room e.g. drapes, curtains, Furniture, plants, shrubs, bushes, trees, other structures like building, garage etc. Air conditioner must have clear unobstructed airflow through the condenser to remove he heat.
2)The window is strong enough to hold the weight of the air conditioner. Extra brackets or supports may be needed depending on your windows. Brackets or Supports not provided in all models.
3)The window sill and track are strong enough to hold he weight of he air conditioner.
4)The wall is strong enough to hold the unit. Extra brackets or supports may be needed depending on the wall. (Brackets or Supports not provided in all models).
5)There is adequate and proper power supply near the air conditioner.
6) DO NOT use adopter plugs.
7) DO NOT use extension cords.
8) Do NOT cut or remove the ground prong.
9)DO NOT modify the plug or the electrical wall outlet in any way. If plug does not fit the electrical outlet have a certified electrician do the necessary change.
10) NOT connect electrical power to the unit before installation.
11)DO NOT use if power cord is worn out, hayed or damage. Avoid using if here are cracks or abrasion damage along the length, plug or connection.
12)DO NOT install into any existing cabinet or sleeve which does not have ride and top air vents.
13)Be careful of exposed sharp edges of the cabinet and sharp coils (fins) on the back of the unit that could cut and cause serious injury.
- 8 -
