Manuals / Haier / Kitchen Appliance / Dishwasher

Haier ESD400 Using The Plate Warmer, Cycles Status Indicators, Water Heated, Washing, Rinsing

Models: ESD400 ESD401 ESD402

1 33

Download 33 pages 27.32 Kb

Page 23

USING THE PLATE WARMER

English

To delay the start

1. Close the door.

2. Repeatedly press	until you see the desired hours of delay in the
display.

select a new number of delay hours.

3. Select a wash cycle and options.

NOTE: To cancel the delay and cycle, press Cancel. To Cancel the delay and start the cycle immediately, press Delay Start until no hours show in the display.

USING THE PLATE WARMER

Use the Plate Warmer option to warm serving dishes or dinner plates.

Note: Do not use the option with cycles.

1. Open the door

2. Press

, Plate Warmer glows.

3. Allow 8 minutes to heat the dishware.

CYCLES STATUS INDICATORS

Follow the progress of your dishwasher with the Cycle Status indicators.

Water Heated

Water Heated glows only when the cycle pauses to heat water to a set temperature. Washing or rinsing continues as water is heated. Once water reaches the set temperature, the light goes off and the cycle resumes.

Washing

Displayed during prewash and main wash periods.

Turbidity Sensor

Sensor glows during the sensing part of the cycle. Your dishwasher sense soil level at the end of the Pre-Wash. Washing continues while Sensing occurs.

Rinsing

Displayed during rinse periods.

22

Image 23

Haier ESD400, ESD402 Using The Plate Warmer, Cycles Status Indicators, Water Heated, Washing, Turbidity Sensor, Rinsing

Contents

Built-In Dishwasher Lave-Vaisselle Incorpere Lavavajillas Empotrado User Manual Model ESD400 ESD401 ESD402Guide de l’Utilisateur Modèle ESD400 ESD401 ESD402 Manual del Usuario Modelo ESD400 ESD401 ESD402English TABLE OF CONTENTSEnglish SAFETY PRECAUTIONSYou will need it to obtain warranty service Staple your receipt to your manualEnglish BEFORE USING YOUR DISHWASHEREnglish GROUNDING INSTRUCTIONSFor a permanently connected dishwasher SAVE THESE INSTRUCTIONSEnglish PARTS AND FEATURESEnglish USING YOUR NEW DISHWASHERSTART-UP GUIDE English DISHWASHER LOADINGLOADING SUGGESTIONS QUIET OPERATING TIPSEnglish LOADING TOP RACKEnglish SURE-HOLD UTILITY SHELFEnglish LOADING BOTTOM RACKEnglish LOADING SILVERWARE BASKET Filling the dispenser DISHWASHER USEPROPER USE OF DETERGENT Detergent DispenserHow much detergent to use Partially fill the Main Wash section to the 30g Water HardnessAmount of Detergent FILLING THE DISPENSER RINSE AID SETTINGTO ADJUST THE SETTING RINSE AID DISPENSERCYCLE SELECTION CHARTS English To stop the drain CANCELLING A CYCLEChanging a Cycle or Setting Sanitize Rinse Option ADDING ITEMS DURING A CYCLEOPTION SELECTIONS Hi-Temp WashTo turn on the Lock Delay Start On some modelsHEATED DRY CHILD LOCK ON SOME MODELSWashing USING THE PLATE WARMERCYCLES STATUS INDICATORS Water HeatedOverfill Protection Float CleanWash System Drying SystemHandles of some knives are attached to the blade WASHING SPECIAL ITEMSHigh water temperature and detergents can affect DISHWASHER CARE Cleaning Cleaning the exteriorCleaning the interior STORING To clean interiorTO clean the drain air gap DRAIN AIR GAPDishwasher will not fill TROUBLESHOOTINGWater residue on the front of the access panel DISHWASHER IS NOT OPERATING PROPERLYSpotting and filming on dishes Dishes are not completely cleanSPOTS AND STAINS ON DISHES Food soil left on the dishesOrange stains on plastic dishes or dishwasher interior White spots on cookware with non-stick finishBrown stains on dishes and dishwasher interior Black or gray marks on dishesDishes are not dry DISHES DO NOT DRY COMPLETELYDISHES ARE DAMAGED DURING A CYCLE NoisesIf you need replacement parts ASSISTANCE OR SERVICELIMITED WARRANTY