Haier ESD402, ESD401 Wash System, Drying System, Overfill Protection Float, Clean, Sanitized

Models: ESD400 ESD401 ESD402

1 33
Download 33 pages 27.32 Kb
Page 24
Image 24
Drying

English

Drying

Lights up when the dishwasher is drying after the final rinse.

Clean

Displayed when a wash cycle is complete. The light will remain ON until door is opened.

Sanitized

Displayed when cycle has met sanitization conditions. The light will remain ON until door is opened.

Add Rinse Aid

Fill the Rinse Aid dispenser when Add Rinse Aid is lit.A rinse aid prevents water from forming droplets that dry as spots or streaks. If the Rinse Aid dispenser is empty, the light glows when you select a cycle or while a cycle is running.

Wash System

The five-level wash system provides excellent cleaning results. Three levels of filtration and a soil collector system filter the wash water and prevent food particles from redepositing on the clean dishes.

The wash water continuously flows through the filter, trapping food particles.

Two water jets, located under the spray arm, remove the food particles from the filter.

A coarse strainer prevents bones, pits, and other large objects from entering the pump system.

NOTE: Periodically check the coarse strainer and remove any objects on the strainer.

Drying System

During drying, you can see hot vapor escaping through the vent at the upper left corner of the door.This is normal as the heat dries your dishes.

IMPORTANT:The vapor is hot. Do not touch the vent.

Overfill Protection Float

The overfill protection float ( in the front right corner of the dishwasher tub ) keeps the dishwasher from overfilling. It must be in place for the dishwasher to

operate.

Check under the float for objects that may keep the protector from moving up or down

23

Page 24
Image 24
Haier ESD402, ESD401, ESD400 Wash System, Drying System, Overfill Protection Float, Clean, Sanitized, Add Rinse Aid