English
13
• Lint filter needs to be cleaned before and after each use for your unit to
operate at optimum efficiency. The filter can be slid out, by pulling on the tab
located on the inside of the dryer door. The filter may be washed or
vacummed. Remove the excess water from the filter by gently shaking the
filter. This will remove dust and particles trapped in the filter. Lint build-up in
screen restricts air flow, which causes longer drying times. After cleaning,
slide the filter back in place.
DO NOT USE YOUR DRYER WITHOUT THE LINT FILTER.
• Do not use any type of spray cleaner when cleaning the interior. Hazardous
fumes or electric shock could occur.
• Clean cabinet with mild soap and water. Do not use harsh or abrasive
cleaners, as this could damage the dryer.
• Clean the duct and the vent on a regular basis to avoid clogging which could
affect the efficiency of the dryer.
Energy Saving Tips
• Keep the lint screen clean and exhaust the dryer properly.
• Sort load batches properly and select proper temperature and cycle settings.
• Avoid overloading, adding wet clothes to a partially dry load and over drying.
• If you have multiple loads to dry, try to dry one load after another right away
to take an advantage of a warm dryer. This way you already have a warm
dryer and you save some time for drying.
• Do not open door needlessly because it causes warm/hot air to escape;
which prolongs drying time.
• Use dryer during low humidity because it will be a normal drying time due to
very less moisture in the air than during high humidity days where the air is
very moist.
CARE AND CLEANING GUIDE