English
INSTALLATION INSTRUCTIONS
•Select a suitable location for the dryer on a hard even surface away from direct sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances etc. Any floor unevenness should be corrected with the leveling legs located on the
bottom of the dryer.
Unpacking Your Dryer
1.Remove all packaging material. This includes the foam base and all adhesive tape holding the dryer accessories inside and outside.
2.Inspect and remove any remains of packaging, tape or printed materials before using the dryer.
Tools and Materials Required
•Phillips head and flathead screwdrivers
•
•1/2 inch open end wrench
•Carpenter’s level
•Measuring tape (12ft. min.)
•Duct tape
•Rigid or flexible metal 4 inch (10.2 cm) duct
•Vent hood
17
