Err7
Err8
UNb
End 19:30 1:25
Motor Error | Contact the maintenance personnel. |
Water exceeds protec ve level. | Contact the maintenance personnel. |
A
er the last rinsing cycle finishes, spinning fails completely due to unbalance of the laundry.
End of wash cycle.
¬Status inform
on: Preset 
me for delayed opera
on.
The remaining 
me is 1 hour 25 minutes.
Control panel lock fun
on: Press the "Delay" and the "Start/Pause" bu
ons simultaneously
for 3 seconds a
er 
g a program. It can no longer be changed by op
g bu
ons or knobs. To unlock press the "Delay" and "Start/Pause" bu
ons again for 3 seconds.
on: In case of abrupt power failure or the need to cut off the power during a program cycle, the present se
ngs will be saved and the preset opera
on will resume when the power is on again.
To cancel a program. Press the "Start/Pause" bu
on, then switch off the power and the
program is autom
ly cancelled. Turn the program selector again to choose another program.
During the spin process, if too much foam is inspected, in order to protect the motor, the washing machine will eliminate the foam automa
y; the motor will stop and the drain pump will drain the water. If it happens more than 5
end of step without spinning.
18
