English
Cleaning and Maintenance
Warning! Never immerse the motor base, power cord and plug in water or other liquids as this may cause a risk of fire or electrical shock. Do not use harsh or abrasive cleaners on any part of the blender.
Quick Cleaning
•Make sure that the power switch is in the “0” off position.
•Remove the glass jar from the motor base and rinse with warm water to remove large food particles.
•Fill the glass jar with
Note: Never use boiling water as it may damage the blade assembly and shorten the life of the blender. Boiling water may also cause steam buildup and cause personal injury.
•Replace the jar on the motor base.
•Press the Pulse button for a few seconds and repeat several times.
•Remove the jar from the motor base and rinse well.
•Repeat as necessary.
•Dry thoroughly.
Thorough Cleaning
•Make sure that the power switch is in the “0” off position.
•Always unplug the blender before cleaning.
•Remove the glass jar from the motor base and rinse with warm water to remove large food particles.
•Disassemble the jar assembly parts. Be careful when handling the blade assembly.
•Wash the jar, cover, measuring cup, gasket, collar and blade assembly in warm, soapy water.
Note: All components of the jar assembly are dishwasher safe. The cover and the gasket should be washed on the upper rack of the dishwasher.
•Dry thoroughly.
•Wipe the power cord and the motor base with a clean, damp cloth and wipe dry.
Storage
Store the blender fully assembled and in an upright position in a clean, dry cabinet.
9