English
Assembling the Blender
1.Place the blender on a flat, level surface. Always operate the blender on a clean, dry surface.
2.Place the gasket (4) around the blade assembly (5).
3.Place the blade assembly (5) with the gasket (4) into the collar (6).
4.Insert the assembled collar (6) into the bottom of the glass jar (3) and turn clockwise to secure tightly. Always do this prior to placing on top of the motor base.
5.Insert the measuring cup (1) into the cover (2) and turn clockwise to secure.
6.Place the cover (2) inside the top of the glass jar (3). Push in securely to prevent leaking and splashing. Never operate the blender without the cover in place.
7.Place the jar assembly (10) onto the motor base (7) and press down until securely engaged.
8.Make sure that the power switch (9) is set in the “0” off position.
9.Uncoil the required length of the power cord.
10.Plug the blender into a 120V, 60 Hz
11.Before removing the jar assembly from the blender base after use, be sure the power switch is in the “0” off position.
Using the Blender
1.Make sure that the power cord is unplugged and that the power switch is in the “0” off position.
2.Check that all parts of the jar assembly are secured in their proper positions.
Warning! The blade assembly must be securely tightened to the jar before food or liquid is placed inside the jar.
3.Firmly place the jar assembly onto the motor base so that it is secure.
Note: Never place the blade assembly on the motor base without the jar being completely assembled and securely tightened.
4.Check that the power switch is set in the “0” off position and plug
the blender into a standard polarized outlet. | 6 |
