Haier HDC10SS user manual English, Automatic/Delayed Brew Function

Models: HDC10SS

1 12
Download 12 pages 53.69 Kb
Page 8
Image 8
Automatic/Delayed Brew Function

English

Note: You can remove the carafe at any time during the brewing cycle and pour a cup of coffee. The coffeemaker will automatically stop dripping while the carafe is removed. To avoid a possible over flow, replace the carafe with in 30 seconds.

7)Do not open the flip up lid cover during the brew cycle. The flow back of hot water could damage the coffeemaker.

8)You can take remove the carafe and serve when the brewing cycle is completed.

Note: The coffee produced will be slightly less than the water you have poured in, as the coffee grounds absorb some water. For your safety, you should keep the lid of carafe down when pouring. This also helps to keep the coffee warm.

9)Always turn the coffee maker off and unplug the power cord from the electrical outlet when the coffee maker is not in use.

Note: Always Use caution when pouring hot coffee, as the fresh brewed coffee is very hot.

Automatic/Delayed Brew Function

Your coffee maker is fully programmable. You can set it to brew up to 24 hours in advance. (For example if the current time is 5:10 PM, you can set the coffee maker to automatically start at 8:15PM)

First follow steps 1 through 5 of the above “making coffee” section. Now you will need to set the automatic start function as follows:

1)Press the “ON/OFF” button twice; the “AUTO” indicator should now be illuminated.

2)Press the “PROG” button; the “LCD” should now be displaying “CLOCK”. Set the clock to the cur- rent time by pressing the “HOUR” and “MIN” buttons. (Fig.2)

Note: The time cycle is 12 hours, ever 12 hours; the “AM” and “PM” will change. Please be

sure to set the clock to the correct current time “AM or “PM”

3)Press the “PROG” button; the “LCD” should now display “TIMER”, now set the automatic start time by pressing the “HOUR” and “MIN” buttons. (fig.3) As per our example, at 8:15PM the “AUTO” indicator light will go off, and the “RUN” indicator light will be illuminated. The coffee maker will now start automatically. After brewing, you will be ready to start serving.

Note: If you leave your coffee maker unattended for 2 hours, it will shut off automatically.

7

Page 8
Image 8
Haier HDC10SS user manual English, Automatic/Delayed Brew Function