Installation Manual For Indoor Unit

(d)When constructing drain piping for several units, position the common pipe about 100 mm below the drain outlet of each unit as shown in the sketch. Use VP-30(11/4") or thicker pipe for this purpose.

(e)The stiff PVC pipe put indoor side should be heat insulated.

Secure the elevation as high as possible (approx. 100 mm)

A downhill grade of

VP 30

1/100 or more

 

(f)Avoid putting the outlet of drain hose in the places with irritant gas generated. Do not insert the drain hose directly into drainage, where the gas with sulfur may be generated.

(g)Backwater bend

Because the drain spout is at the position, which negative pressure may occur. So with the rise of water level in the drain pan, water leakage may occur. In order to prevent water leakage, we designed a backwater bend.

The structure of backwater bend should be able to be cleaned. As the below figure shown, use T type joint. The backwater bend is set near the air conditioner.

As figure shown, set a backwater bend in the middle of drain hose.

H1

H2

Drainage Test

H1=100mm or the static pressure of air sending motor H2=1/2H1 (or between 50~100mm)

1Conduct a drainage test after completion of the electrical work.

2During the trial, make sure that drain flows properly through the piping and that no water leaks from connections.

3In case of a new building, conduct the test before it is furnished with the ceiling.

4 Be sure to conduct this test even when the unit is installed in the heating season.

Procedures

1Supply about 1000 cc of water to the unit through the air outlet using a feed water pump.

2Check the drain while cooling operation.

6.Installation of air suction and discharging duct

muffler cavity (air sending)

Enlarging chart of

 

Sacking joint

 

profile chart A

Insulation

A

Vibration resistance hook

Air volume adjuster

Air outlet

Air conditioner

Ceiling

main unit

Air suction grille with air filter

 

Checking meatus

Please consult the after-sales service worker of Haier Air Conditioner for the choosing and installation of suction inlet, suction duct, discharging outlet and discharging duct. Calculating the design drawing and outer static pressure, and choose the discharging duct with proper length and shape.

27

Page 27 Page 29
Page 28
Image 28
Haier HDU-42HF03/H installation manual Installation of air suction and discharging duct, Drainage Test, Procedures
Page 27 Page 29

HDU-42HF03/H specifications

The Haier HDU-42HF03/H is a remarkable addition to the world of cooling and heating solutions, designed to meet diverse climate control needs in residential and commercial settings. This sleek and efficient ducted air conditioning unit combines advanced technology with reliability, ensuring optimal comfort for users throughout the year.

One of the standout features of the HDU-42HF03/H is its impressive energy efficiency. With a high Energy Efficiency Ratio (EER) and Coefficient of Performance (COP), it minimizes energy consumption while maximizing cooling and heating output. This sustainability-centric design not only reduces electricity bills but also supports environmentally friendly practices.

The unit employs inverter technology, which allows for variable speed control of the compressor. This means that the air conditioner can adjust its cooling or heating power based on the room's temperature, maintaining a consistent environment without the constant on-off cycling of traditional systems. This translates to quieter operation and longer equipment lifespan, as it reduces wear and tear on the components.

Equipped with advanced air filtration technology, the HDU-42HF03/H helps improve indoor air quality by trapping dust, pollen, and other allergens. This is particularly beneficial for individuals with respiratory conditions or sensitivities. The unit is designed for easy maintenance, with accessible filters that can be cleaned or replaced as needed, ensuring optimal performance over time.

The Haier HDU-42HF03/H is also notable for its climate adaptability. It can efficiently operate in various ambient conditions, making it suitable for different geographical locations. Its robust build quality ensures that it can withstand the rigors of daily use.

In terms of features, the HDU-42HF03/H offers a user-friendly control interface, enabling easy temperature adjustments and mode selection. Smart home compatibility allows users to integrate the system into existing smart devices, providing enhanced control and convenience.

Overall, the Haier HDU-42HF03/H stands out as a reliable and efficient choice for those seeking a versatile air conditioning solution. With its blend of energy efficiency, advanced technology, and user-centric design, it is well-equipped to provide comfortable living and working environments year-round. Whether for cooling hot summers or efficiently heating during chilly winters, this unit is a commendable option for modern climate control needs.
Top Page Image Contents