Starting the Appliance

Starting a wash cycle￿

After having completed all of the installation steps in the preced- ing paragraphs, turn on the water to the unit, partially open the door of the dishwasher, and press the ON-OFF button "A" lo- cated on the control panel. The "B" indicator light will come on. At this point, the appliance is on and ready to be programmed.

Setting and Starting a wash Cycle

Choose the desired cycle by pressing the cycle selection button "P". Each time it is pressed, one of the cycle indicator lights "J" will come on in succession.

Choose the wash cycle you feel is most appropriate for the type of dishes that need washing (consult the wash cycle table con- tained in this manual, especially when first using the appliance). Close the door and after a few seconds, the wash cycle has be- gun and cannot be modified. If necessary, read the paragraph entitled, "Cancelling or modifying a cycle while underway. "The end of the cycle will be signalled by a double acoustic sound, and the indicator light "J" will begin to blink.

GB

At the end of the wash cycle...

The end of the cycle will be indicated by a double acoustical signal and the blinking of the "J" indicator light. Open the door, turn off the appliance using the ON-OFF switch and turn off the water supply to the unit. Wait a few minutes before removing the dishes so as to avoid handling them while still hot (when they are more susceptible to breakage) and to get better drying results.

Setting The Start Delay Time

Open the door of the dishwasher partially. If the "C" button is pressed (see, Close-up View" Control Panel"). The start time for the wash cycle can be delayed for 2,4,6,8,10 or 12 hours.

Each time the button is pressed, the "D" light will come on indi- cating the length of the delay.

After selecting the delay time, the wash cycle can be set, as explained in "Setting and starting a wash cycle..." There will be a short acoustic signal, and at this point the delay period will begin to count down. During this period the delay indicator light (D) will blink. At the end of the delay time, the indicator will stop blinking and the cycle will start.

Wash Cycle Table

GB

Cycle

Cycle

Description of

Detergent

Rinse Aid

Selection

 

Cycle

 

 

 

Information

 

 

 

 

 

 

 

 

 

 

 

 

Very dirty dishes,

Pre-wash with hot water.

 

 

 

pots and pans. (Not

Extended wash at 70￿K

 

 

 

to be used with deli-

Rinse with cold water.

30g

￿

Heavy Duty

cate items)

Rinse with hot waterK

 

 

 

Drying.

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-wash with cold water.

 

 

 

Normal dirty dishes,

Extended wash at 50￿.

 

 

 

pots and pans. Stan-

5+25g

￿ERF

 

Rinse with cold water.

 

dard daily cycle.

Rinse with hot water.

 

 

Normal Wash

 

 

 

 

Drying.

 

 

 

 

 

 

 

 

 

 

 

 

Normal dirty dishes,

Pre-wash with cold water.

 

 

 

Extended wash at 50￿K

 

 

 

pots and pans without

 

 

 

Rinse with cold water.

30g

￿

 

 

Cancelling or modifying a cycle while underway...

Premise: A cycle that is underway can only be modified if it has only been running for a short time.

Otherwise, the detergent may have already been used, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled (see the paragraph entitled, "Loading the Detergent").

To change the cycle currently underway, open the door, the ON- OFF bution "A". Follow the instructions contained in the para- graph entitled "Starting a wash cycle...","Setting and starting a wash cycle".

To set a new wash cycle, follow the instructions contained in the paragraph entitled, "Setting and Starting a Wash Cycle".

If you forget to load some of the dishes...

The wash cycle can be interrupted by opening the door carefully (in order to avoid being sprayed by hot water). When the door is closed again, the cycle will automatically restart at the point where it left off.

NOTE:

During the delay period, none of the settings can be modified. If the ON-OFF button "A" located on the contro panel, the door is opened during the delay period, the clock will stop the countdown. It will start again when the door has been closed.

Wash Cycle Adjustment Buttons

1/2 Load Button

This button (see" Close-up View-Control Panel", letter "E") makes it possible to wash dishes using only the upper rack if there are not enough dishes for a full load, This will allow you to save on water and electrical energy.

 

 

dried on residue.

Rinse with hot waterK

 

 

 

 

 

 

 

 

Light Wash

 

Drying.

 

 

 

 

 

 

 

 

 

 

Economic, fast cycle to

Wash at 45￿.

 

 

 

 

be used for items which

 

 

 

 

Rinse with warm water.

 

 

 

 

are sensitive to higher.

15g

￿

 

 

Hot rinse.

 

 

Run immediately after

 

 

 

Glassware

Drying.

 

 

 

dishes are used.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Economic, fast cycle to

 

 

 

 

 

be used to on not very

Short wash at 40￿.

 

 

 

 

dirty dishes right after

15g

 

 

 

Cold rinse.

 

 

 

they are used. No dry-

 

 

 

 

 

 

 

 

Rapid Wash

ing cycle.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-wash of dishes,

 

 

 

 

 

pots and pans while

Short cold wash to prevent

 

 

 

 

waiting for the load to

food residue from drying on

 

 

 

Soak

be completed after the

the dishes K

 

 

 

subsequent meal.

 

 

 

 

 

 

 

 

 

 

 

The cycle of heat wash-

Heat washing.

 

￿

 

 

ing and dry tableware.

 

 

 

 

 

 

 

Heat wash

.5.

.6.

Page 3 Page 5
Page 4
Image 4
Haier HDW700BI manual Starting the Appliance, Wash Cycle Table
Page 3 Page 5

HDW700BI specifications

The Haier HDW700BI is a high-performance built-in dishwasher designed to elevate kitchen convenience and efficiency. With its sleek and modern design, this appliance not only enhances the aesthetics of any kitchen but also promises outstanding cleaning capabilities.

One of the standout features of the HDW700BI is its spacious interior, which can accommodate up to 16 place settings. This makes it an ideal choice for families or anyone who frequently entertains guests. The adjustable racks and foldable tines provide flexibility, allowing users to customize the interior space to fit larger pots and pans, which is often a challenge in many dishwashers.

The Haier HDW700BI is equipped with multiple wash cycles, providing users with options tailored to specific needs. From a quick wash for lightly soiled dishes to a heavy-duty cycle for stubborn grime, this dishwasher ensures optimal cleaning performance every time. Additionally, the delicate wash cycle is perfect for fragile items, offering peace of mind while washing glassware and china.

Energy efficiency is another key characteristic of the HDW700BI. With its Energy Star certification, this dishwasher not only reduces energy consumption but also contributes to lower utility bills. The eco-mode further enhances its efficiency by using less water and energy during cycles, making it an environmentally friendly choice for conscious consumers.

The innovative noise reduction technology in the Haier HDW700BI allows it to operate quietly, making it suitable for open-concept living spaces. With a noise level of just 45 dB, users can enjoy conversations or watch television without the distraction of a loud dishwasher running in the background.

Moreover, the HDW700BI features a delay start option, giving users the flexibility to set the washing cycle according to their convenience. With a sleek control panel that is user-friendly, selecting the desired cycle and options is straightforward and intuitive.

In summary, the Haier HDW700BI is a versatile, efficient, and stylish built-in dishwasher. Its generous capacity, various wash cycles, energy-saving technologies, and quiet operation make it an excellent choice for modern kitchens, ensuring that dishwashing becomes a hassle-free task. Whether you're a busy family or someone who enjoys entertaining, the HDW700BI delivers performance and convenience to meet all your dishwashing needs.
Top Page Image Contents