Washing Procedure
/Detergentdistribution drawer
Thereare instructions on the handle of the distribution drawer. Swing
outthe drawer, three compartments can be seen.
Compartment1: Pre-washing detergent. If pre-wash is not selected, do
notadd detergent.
Compartment2: Detergent for all washing programs. Detergent must be
addedwhether pre-wash is selected or not.
Compartment3: Softening agent, conditioning agent, perfume, etc
K:Display
Remainingtime, set temperature, spinning speed, other function information, and error messages
aredisplayed. Refer to the Display Description

H:Wash programming knob and start button
Byturning the knob clockwise or counterclockwise, the required program can be selected;
pressthe start button to start a program; press it again to pause
I:Speed button
Pressthis button to set a required spinning speed, which covers 0 rpm to 1200 rpm.
J: Temperature button
Pressthis button to set a required temperature. The selectable temperature range is
0-90Ɔ.(Some programs have temperature limits. Refer to the programming guide)
B+C:combination for keyboard lock
Aftera program is started, press the delay tbutton and the Prewash button at the same
timefor 3 seconds, the keyboard will be locked and "SAFE ON" will appear on the screen.
Pressthe two buttons again for 3 seconds, the keyboard will be unlocked and "SAFE OFF"
willbe displayed. This function is used to protect the washing machine from being disturbed
duringoperation, such as accidental press of buttons or turning of knobs by children, as this
mayaffect or suspend the operation of a program. Note: If this function is activated during
a washing cycle, be sure to inactivate it at the end of the cycle when the "End" sign is
displayed.
Caution:If the keyboard lock is not activated, press the Start/Pause button and then cut off
thepower, the suspended program will be canceled after power is resumed. Now turn the
programknob to reselect.
Functions
Notes: 1) When first using the washing
machine,letit run unloaded for one program
toprevent the laundry from being tainted by
oilor dirty water from the washing machine.
2)Do not overload the washing
machine.
Toget the best washing effect, an appropriate washing program should be selected
accordingto the laundry type.
Note:The above operations refer to conditions without power-off memory. Or the washing
machinewill continue operation from where the program was broken. To clear memory,
pressthe Start/Pause button. Turn off the power for a few seconds and turn on again, all
thesettings will be renewed.
1. Loading
Slideout the detergentdrawer and put the required detergent and
softeningagent into the corresponding boxes. Push back the drawer gently.
Caution:
1) For pre-washing program, detergent should be added to both
compartments1 and 2. Compartment 2 allows only solid detergents.
Forother programs, do not add detergentto compartment 1.
2)Do not overuse softener; otherwise, it will damage the artificial
fibers.Refer to the instructions during use.
2.Adding detergent
3. Selecting washing program
LoadReference
ƽ
Overalls
(cottonappr 950g)
ƽBlendedfabric
clothes
(appr800g)
ƽ
T-shirt
(cotton
appr300g)
ƽJackets(cotton
appr800g)
ƽWoolen
blankets
(appr3000)
ƽSinglebed sheets
(cottonappr 800g)
ƽSocks(blended
fabricsappr 50g)
ƽ
Underwear
(blendedfabrics appr 70g)
ƽ
-HDQV
J
ƽPajamas
(appr200g)
ƽShirts
(appr300g)

Openthe door, put in the laundry piece by piece.
Closethe door tightly.