Haier HK1270TVEME operation manual Wiring Circuit, Matters Needing Attention, Power Drive PCB

Wiring Circuit

HK1270TVEME

NL

Power Switch

						STST--21Display PCB
O1	J12-3					ST-3
						ST-4
O2	J12-4					ST-5
						ST-6
D1	J12-11					ST-7
Door Lock						ST-8
						ST-9
D2	J12-12				N1
				J12-1		Thermostat
D3	J12-4
				J12-2	N2
	M1B1	Power Drive PCB
M					P1
				J12-11		Drain Pump
	M2B2			J12-5	P2
Motor	M3B3					VH2
	M4B4			J12-7	VH1	Electronic Wash Switch
	M5B5			J12-8	V1
					V2
	M6B6			J12-9
G
	M7B7			J12-10
	J12-5	J12-6
	L1	L2
		L3
			H1	H2
	Pressure Switch		Heating Element

Matters Needing Attention

8.The washing machine should not be installed	9. The carpet must not obstruct the ventilation
outdoors or in a damp place. In the event of water	openings in the base of the washing machine.
leakage or splashes allow the machine to dry
naturally.

10.Keep away from heat sources and direct sunlight 11.During installation, ensure that the electric
to prevent plastic and rubber components from	cable is not trapped by the washing machine
aging.	and avoid damage to the electric cable.

During Use

1.Before use, check the joints of the filling hose, the tap and the drainage hose for possible problems from water pressure fluctuations. If joints are loose or there is leakage, turn off the tap and repair. Do not use the washing machine until the hoses are properly fixed.

2.Keep the door slightly open when the washing

machine is not in use to prevent formation of odors; do not cover the washing machine with plastic cover so that inside dampness cannot be kept in.

15 2