OPERATION INSTRUCTIONS
ENGLISH
SETTING THE CLOCK
When you first plug in your microwave, you must first set the time.
1.Plug in the microwave.
2.Turn the Dial to select hours.
3.Press the Start/+30 sec/Select button.
4.Turn the Dial to select minutes.
5.Press start/+30 sec/select button to finish.
To reset the clock:
1.Press the Timer/Clock button twice.
2.Turn the Dial to select hours.
3.Press the Start/+30 sec/Select button.
4.Turn the Dial to select minutes.
5.Press Start/+30 sec/select button to finish.
NOTE:
1.You can use the oven without setting the clock
2.The oven uses a
3.The clock will keep the time of day as long as the oven is plugged in and electricity it provided.
QUICK 30 SECONDS
The Start/+30sec/Select button can be used to set the time for cooking or for adding extra cooking time while food is already cooking.
NOTE: The microwave’s power level is automatically set to 100%
1.To set the time for cooking, press
Start/+30sec/Select button and the oven will begin cooking for 30 seconds.
2.To add extra cooking time during cooking, press the Start/+30sec/
Select button during cooking this will increase cooking time by 30 seconds. The maximum amount of time that can be added is 95 minutes.
STOP / CLEAR
1.To stop the microwave at any point during cooking, press the Stop/Clear button.
SETTING THE POWER LEVEL
Variable power levels add flexibility to microwave cooking. Each power level gives you microwave energy a certain percent of the time, for example, Power Level 3 is microwave energy 30% of the time. Power Level 10 will cook faster but food may need more frequent stirring, rotating or turning over. A lower setting will cook more evenly and need less stirring or rotating of the food. Some foods may have better flavor, texture or appearance if one of the lower settings is used. Use a lower power level when cooking foods that have a tendency to boil over, such as scalloped potatoes. Rest periods (when the microwave energy cycles off) give time for the food to transfer heat to the inside of the food. An example of this is with the defrost cycle (Power Level 3). If the microwave energy did not cycle off, the outside of the food would cook before the inside was defrosted.
1.Press the Power Level button.
2.Turn the dial to select the power level.
3.Press the Start/+30 sec/Select button to enter.
PAGE 13 • SET UP & USE
