Meijer.com
English
Assembly and Installation
Accessories Include
1.Main window panel and extension panels
2 | . Ex haust nozzle | 1 piece |
3 . Screws | 8 pieces | |
4 | . Exhaust hose | 1 piece |
5 | . Cover | 1 piece |
6 | . Foam | 2 pieces |
7 | . Hose connector | 1 piece |
CZ/ff?@rcy
®~@~0(g
1)Connect the 3 pieces of the window panels by sliding the 2 extension panels into the main window panel.
2)Apply a foam strip to the end of each extension panel.
3)0pen the window and place the window panel assembly into the window. Adjust the extension panels to fit the width or height of the window as shown below (see figure A). Secure the extension panels using 4 blunt tip screws (see figure
4)Expand the 2 ends of the exhaust hose. Connect the hose connector to one end of the exhaust hose by turning clockwise. Then insert the exhaust nozzle at the other end of the exhaust hose by turning clockwise (see figure C) to create the hose assembly.
5)Siide the hose connector end (the square end) of the hose assembly into the rear of the unit (see figure D).
6)1nsert the exhaust hose with nozzle end into the window panel(see figure E). 7)Piug the power cord into the wall outlet and press the "Reset"buHon. 8)Piease allow 8" of space around the unit for proper air circulation.
9)When removing the portable air conditioner for storage, the window panel may be left in place . Simply place the cover over the nozzle hole (see figu re
c | Hose outlet |
|
|
D
A) .
A
Double Hung Window | Sliding Window |
\
J- *~\"I
~ ~
INDOOR
E
B
4
B- 1 |
6