Usage of accessories
Shelf height can be adjusted
You can adjust the shelf height according to your storage necessity.
First, lift and take the shelf out, insert the top hook in the back hole of the refrigerator, then putting it down to lock it.
Raise to take it out
Tilt upward
Insert lock
Lower to get lock
About the refrigerator compartment
Put those foodstuffs in refrigerator compartment to be stored for short time or to be eaten any time:
Although it is possible to make the majority of space of the refrigerator compartment to be at an average temperature between
Recommended spaces for various foodstuffs
When dismanting
When installing
Due to cold air circulation in the refrigerator compartment, the temperatures inside the compartment vary with locations. Area ⑥ is the coldest part of the refrigerator compartment, so different kinds of food should be put in different areas.
④ | ① |
| |
⑤ | ② |
|
Humidity adjustable vegetable tray
When storing fruits and vegetables, do your best to remove completely any water cumulated on the bottom of vegetable tray, and wipe dry the vegetable tray.
This vegetable tray is able to adjust its humidity degree according to its storage necessity. When storing vegetable, you can push the slide to the "high" side to provide a high degree of humidity for vegetable. When storing fruits, push the slide to the "low" side to provide a low degree of humidity for fruits.
Slide
①Eggs, butter, cheese, and the like
②
③ Beverage, and various bottled foodstuff
④ Souse food, can, etc
⑤ Meat product, pot food
⑥ Cooked wheaten food, cans, milk, bean curd, and the like
⑦ Prepared meat food, sausage, and the like
⑧ Fruit, vegetable, salad, etc
⑥ |
|
⑦ | ③ |
| |
⑧ |
|
High Low
Snack box
The snack box can be moved to appropriate position as necessary.
Lamp and lamp replacement
This refrigerator has a ligth. 220V, 40W |
|
Lamp holder: E26 (lamps exceeding 40 must not be |
|
used) |
|
When replacing the lamp, |
|
● Unplug to disconnect the power | Rear |
● Remove the food shelf and press the lamp shade |
|
to release the lugs from the slot then the light shade |
|
can be removed. | Rear | |
● Turn the lamp | ||
| ||
● Insert the lugs on the shade into the square holes, | Lugs | |
and the hold the rear of the lamp shade and pull to | ||
| ||
locate. |
|
8 | 9 |