Haier HSU-12HV03/R2(SDB), HSU-09HV03/R2(SDB) Sleep Operation, Use of Sleep function

Operation

Sleep Operation

Before going to bed, you can simply press the SLEEP button and unit will operate in SLEEP mode and bring you a sound sleep.

Use of SLEEP function

After the unit starts, set the operation status, then press SLEEP button before which the clock must be adjusted and time being set.

Operation Mode

1. In COOL,DRY mode

1 hours after SLEEP mode starts, temp. will become 1OC higher than temp. setting. After another 1 hours, temp. rises by 1OC further.

The unit will run for further 6 hours then stops. Temp. is higher than temp. setting so that room temperature won't be too Iow for your sleep.

Remote Controller

FRESH

STERILIZE

SLEEP operation starts SLEEP operation stops

		Approx.6hrs
	1 hr	Rises 1OC
1 hr	Rises 1OC
Temp.setting		Unit stop

In COOL, DRY mode

2.In HEAT mode

1 hours after SLEEP mode starts, temp will become 2 OC lower than temp. setting. After another 1 hours, temp decrease by 2 OC further. After more another 3 hours, temp. rises by 1OC further. The unit will run for further 3 hours then stops. Temp. is lower than temp. setting so that room temperature won't be too high for your sleep.

Temp.setting		Unit stop
1 hr	Decreases 2OC
	1 hr
	Decreases 2OC
		3 hrs
	3 hrs	Rises 1OC
SLEEP		SLEEP
operation starts		operation stops

In HEAT mode

3.In AUTO mode

The unit operates in corresponding sleep mode adapted to the automatically selected operation mode.

4.In FAN mode

It has no SLEEP function.

5.Set the wind speed change when sleeping

If the wind speed is high or middle before setting for the sleep, set for lowing the wind speed after sleeping.

If it is low wind, no change.

16