Operation
HEALTH operation
Remote controller
1.Unit start
Press ON/OFF on the remote controller, unit starts.
Health function includes health anion function, UV light degerming function and
2.Health anion function
FRESH
STERILIZE
Press HEALTH button. For each press, 
is displayed.
Air conditioner starts health anion function operation.
For twice press, 
disappears,the operation stops.
3.UV light degerming function
Press STERILIZE button ,"
"and "
"displayed on the remote controller and the air conditioning starts the UV light degerming function.
"
": For timing operation of UV light degerming function and automatically canceled after 30 minutes' operation.
"
": For the
No display: For UV light degerming function not starting.
4.Change-for-fresh-air function
Press FRESH button , " 
"displayed on the remote
controller and the 
"disappears and the
When indoor fan motor is running, it has healthy process function. (It's available under any mode)
When the fan in the indoor unit does not work, the health lamp lights up, but the anion generator does not release anion.
Note:
(1)when the unit is operating health or sterilize function," 
" displayed on the display board and " 
" is displayed on the display board in the sterilize function.
(2)The buttons and the functions of FRESH and STERILIZE are only for the units of
(3)The buttons and the functions of Power/Soft are only for the units of
BRIEF INTRODUCTION TO HEALTH ANION FUCTION
The anion generator in the air conditioner can generate a lot of anion effectively balance the quantity of position and anion in the air and also to kill bacteria and speed up the dust sediment in the room and finally clean the air in the room.
About UV light degerming function
UV light emitted by the UV light device of the indoor unit catalytically activates the nano TiO2 on the
Note: when the function is running, don't open the inlet grille.
About change-for-fresh-air function
1.After the
2.Setting the
9
