Installing the Wall Plate
Remove all pieces of the wall mounting system to ensure you have
all the necessary parts.
Be sure to choose a mounting location with easy access to an AC power outlet.
Wood Stud Mounting:
1)Using an electronic stud sensor, locate two adjacent wall studs at least 12" apart.
2)With the help of a friend, align the wall plate’s top and bottom horizontal mounting slots over the center of each wall stud.
�����
3) ����� Level the wall plate with the bubble level. Hold the plate firmly in place.
4) Mark the stud center in each of the four slots (bottom left, top left, bottom right, top right).
5) With your electrical drill and 3/16" bit,
6) Attach the wall plate to the wall using the lag bolts and round washers as shown to the right. Tighten each bolt with your electric drill or socket wrench. Turn clockwise until secure.
DO NOT over tighten bolts. This can damage the wall plate or your wall surface.
DO NOT release the wall plate until you are absolutely certain it is secured to the wall.
8
