Installing the Wall Plate continued
Masonry Mounting
While masonry materials (bolts and concrete anchors) are included, masonry mounting requires specialized knowledge, skills and tools. Monster highly recommends you seek the assistance of a professional installer when mounting to masonry.
DO NOT drill holes in masonry mortar joints.
1) | ����� | With the help of a friend, position the wall plate in your desired |
����� |
mounting location. Level the wall plate with the provided bubble level. Mark the centers of four bolt slots as shown to the right. Be careful not to mark a mortar joint.
2)With your electrical drill and 1/2" masonry bit,
3)Install the supplied plastic concrete anchors in each hole. Tap into hole until fully seated.
4)Attach the wall plate to the wall using the lag bolts and round washers as shown to the right. Make sure flat center of the plate is facing the wall.
DO NOT over tighten bolts. This can damage the wall plate or your wall surface.
DO NOT release the wall plate until you are absolutely certain it is secured to the wall.
10
