Operation
Select TEMP.setting 
FAN Operation 
SWING Operation
| 1 Press TEMP.setting |
| Press TEMP button. |
| Every time the button is |
| pressed, temp. setting |
| increases 0.5oC. |
AM | Every time the button is |
| |
| pressed, temp. setting |
SMART | decreases 0.5 oC. |
| Unit will start running to reach |
| the temp.setting on LCD. |
2 FAN Operation |
|
| 1Up and down air flow direction | |
| For each press of “ | ” button, |
| air flow direction on remote | |
AM | controller displays as follows | |
| according to different operation | |
SMART | modes: |
|
|
| |
| COOL/DRY: |
|
| HEAT: |
|
| SMART: |
|
| Initial state |
|
2 Left and right air flow direction |
| |
Press FAN SPEED button. For each press, fan speed changes as follows:
|
|
|
|
|
|
|
|
|
LOW MED |
| HI |
| AUTO | ||||
|
|
|
|
|
|
|
|
|
Unit will run at selected fan speed.
For each press of “ 
” buttor,remote controller displays as follows:
remote controller:
Initial state
When humidity is high,condensate water might occur at air outlet if all vertical louvers are adjusted to left or right. 
It is advisable not to keep horizontal flap at downward position for a long time in COOLor DRY mode , otherwise, condensate water might occur.
As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more helpful for a
better air circulation.
