English
Installation Instructions
Unpacking your TV
•Remove all packing materials. This includes the styrofoam and all adhesive tape holding the TV accessories. Inspect and remove any remains of packing, tape or printed materials before using the TV.
Television Location
•The TV must not be placed in sunlight or bright lights, including reflections.
•The TV must be kept away from excessive heat or moisture.
•The TV must be kept away from magnetic equipment such as external speakers, motors and fans.
Start Up
Follow the steps below to get your TV connected and ready for
watching.
1.Plug in your TV. Plug the cord into the
2.Hook up your TV. Connect cable or antenna to the provided connection on the back of the TV. Note: TV antenna or cable wire is not included with the television set. You need to purchase an antenna if you are not going to hook up cable service. If you have a cable service then you must have an existing cable wire that your local cable company had provided at the time of your cable installation that needs to be connected.
3.Put batteries in the remote control. Place two AAA size batteries (batteries supplied) into the remote control compartment by matching its + and – end of each battery.
batteries
4. Turn on the TV. You can turn
on the TV by pressing the power
button on the TV set or Remote
Control.
power button
6
