English
Installing the Handle (fig. 7 & 8)
1.Use a flathead screwdriver to gently remove the plastic screw hole covers from the handle and the plastic hole plugs from the door.
2.Remove the door handle by unscrewing the upper and lower screws with a Phillips screwdriver. (see fig. 7)
3.Install the handle on the right side of the door with the screws previously removed.
4.Replace the plastic screw hole covers onto the door handle.
5.Replace the plastic door hole plugs on the side of the previously removed door handle. (see fig. 8)
fig. 7
fig. 8
Door handle
Door handle plugs
Normal Operating Sounds You May Hear
•The fan circulating air inside the interior of the unit maintains the temperature you have selected.
•Boiling water, gurgling sounds or slight vibrations are the result of the refrigerant circulating through the cooling coils.
•Sizzling or popping sounds result from frost melting during the automatic defrost cycle and dripping onto the defrost heater.
•The sound of dripping water occurs as ice melts from the evaporator and flows into the drip pan during the defrost cycle.
•Cracking or popping sounds are caused by the expansion and/or contraction of the cooling coils during the defrost cycle.
•Both the defrost timer and the thermostat controls will click when they cycle ON and OFF.
11
