English
proper wine & beverage center care and cleaning
Cleaning and Maintenance
Warning: To avoid electric shock always unplug your wine & beverage center before cleaning. Ignoring this warning may result in death or injury.
Caution: Before using cleaning products, always read and follow manufacturer’s instructions and warnings to avoid personal injury or product damage.
General:
Door Gaskets:
• Prepare a cleaning solution of
• Rinse with clean warm water and dry with a soft cloth.
• Do not use harsh chemicals, abrasives, ammonia, chlorine bleach,concentrated detergents, solvents or metal scouring pads. SOME of these chemicals may dissolve, damage and/or discolor your wine & beverage center.
•Clean door gaskets every three months according to general instructions. Gaskets must be kept clean and pliable to assure a proper seal.
•Petroleum jelly applied lightly on the hinge side of gaskets will keep the gasket pliable and ensure a good seal.
Power Interruptions
•Occasionally there may be power interruptions due to thunderstorms or other causes. Remove the power cord from AC outlet when a power outage occurs. When power has been restored, replug power cord to AC outlet.
Vacation and Moving Care
•For long vacations or absences, unplug the wine & beverage center and clean the door gaskets according to “General cleaning” section. Leave doors open, so air can circulate inside.
•When moving always move the wine & beverage center vertically. Do not move with the unit lying down, as possible damage to the sealed system could occur.
Note: After moving, wait for 24 hours before plugging in the
9wine & beverage center.
