1.
80 - 10 0 c m
2.
1. 2.
07
bEfoRE USE
INLET HoSE
1. Connect the nut on the inlet hose to the connector on
the water valve.
2. Apply inlet hose to a water tab with cold, fresh water.
Note: Use the hose-set supplied with the appli-
ance. old hose-sets should not be reused.
DRAIN HoSE
1. Use the drain hose bracket to keep the end of the
drain hose retained and prevent the outflow of water.
Do n' t e xt en d t he le ng th of th e dr ai n h os e; if an ex -
tended hose is required, please consult a serviceman.
2. The height of the drainage outlet must be 80-100 cm.
fix the drain hose to the clip at the back of the wash-
ing machine to prevent it from dropping off.
Note: The drain hose should not be submerged in
water and should be securely fixed and leak-free. If the
drain hose is placed on the ground or if the pipe is at
a height of less than 80cm, the washing machine will
continuously drain while being filled (self-siphoning).
CoNNECTINg To THE PoWER SUPPLY
before connecting to the power supply, check:
¬ The socket is adequate for the maximum power of the Washer Dryer
(for safety, fuses in the power circuit should be rated for no less than 15A).
¬ The voltage should meet the requirement.
¬ The power outlet should be capable of accepting the Washer Dryer plug.
¬ Connect the machine to an earthed socket outlet.