Safety precautions

Please insert the power cord into special receptacle with rated vol- tage. Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably. If possible, please adopt electric leakage protector.

The power cord plug should be convenient to be pluged in or pluged out with hand while the washing machine runs normally. Be sure to pull the plug out and close the water tap when the machine is idle, when moving the machine, or when cleaning the machine. Do not use wet hand to ins- ert or pull out the power plug.

Do not damage the power cord, bend , extend, twist, bind or alter it by force. Do not press or nip it with weight. If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified

person in order to avoid a hazard. Keep the pin of the

power plug clean, if the power plug is polluted with

dust, please wipe with dry cloth carefully.

 

 

 

 

 

 

 

 

Do not put the machine at damp place like

Do not use water hotter above 50 C .

the bathroom. Never wash it with water.

 

Not put wet laundries on the control panel.

 

For washing machine with ventilation openings in the base, that a carpet must not obstruct the openings.

The ventilation holes at the bottom

soft items

Do not wash water-proof laundries like the raincoat, bike covers etc.

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose,

do not use the plug any more.

2

Page 4
Image 4
Haier HWM-2.0/S user manual Safety precautions, Dust, please wipe with dry cloth carefully