Haier HWM-2.0/S user manual Process washing, Close the top lid Connect the power line

Process washing

1.Put into the laundry and detergent, then fill the water needed.

Install the water inlet hose Water inlet hose

Insert the water inlet hose into the water-filling entrance on the control panel.

The appliance is to be connected to the water mains using new hose-set and old hose-set should not be reused.

NOTE

1.Confirm that the drain hose is properly hanged before fill water, or the water will flow through the drain hose.

2.Inside the washing machine tubbiness, It be marker reference water line"1" "2" "3"and the top water line"MAX".Not to a certainty over the mark"MAX".

2.Close the top lid

3.Connect the power line

Water-filling entrance

Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.

7