Cleaning the filter frame
2.Cleaning the filter frame
Clean the lint around the frame and flush with tap water.
3.Install the filter frame.
(1).Insert the mounting plate at the bottom of the frame into the valve cover.
(2).Hang up the hook at the left upper side.
(3).Push the upper part in as indicated in Figure 2.
Hook
Figure 2
Disposal of the complete unit
Wipe the complete unit with soft cloth
twisted dry.
Wipe with neutral detergent if too dirty
Do not wash it directly by water
Alcohol
Petrol 
Thinner
After washing, dismount the water inlet hose.
Do not store water in the tub for long period. Discharge the water immediately after each using.
Pull off the power plug and hang up the power cord.
Hang up the drain hose.
Wipe off the water drops on the surface and inside the tub with clean soft cloth. Open the cover of the wash tub and the inner/outer cover of the spin tub for some time (about one hour), then close them.
14
