Trouble-shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or
Phenomena | The reason | |
| Is there power failure? | |
| ||
The machine does not act. | Is the power plug loose? | |
| Is the pulsator twisted by foreign materials? | |
|
| |
The draining does not work | Is the drain hose frozen? | |
Is the drain hose blocked by foreign material? | ||
| ||
| After long running in the hot weather, power will be cut | |
| automatically, some minutes later the machine will | |
| continue to work | |
|
| |
There's abnormal sound | Are there hair pin, coins or metal items brought | |
during washing | inside the tub? | |
|
| |
There's abnormal sound | Is the machine slanting? | |
and violent vibration | Is the gland pressed evenly? | |
during spinning | Are the laundries in spin tub too much? | |
|
| |
There may be some water | It is the water remained in the factory inspection | |
flowing out of the drain | ||
hose in the first use of | of performance. | |
the machine. |
|
When the remained water is frozen
Prevent the freezing (be sure to discharge the water completely after using)
After complete draining, set the "WASH SELECTOR" at "STRONG" or "STANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen water to melt.
When the water is frozen
Pour hot water below 50
into the wash tub to soak it completely. Then turn the pulsator with hands gently. Please confirm the drainage can work normally before next using.
Below 
15
