How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation 
position of the drain hose.
Extend the drain hose from the side of spin tub
Back
Figure 1
Front
Put soft items on the ground. Lean the machine
down gently with the front surface facing the 
ground. Take off the drain hose from the cabinet. 
Take the hose out of the fixing groove. 
(See to Figure 2).
Embed the drain hose into the groove | Soft item |
| |
along the side of the spin tub in the order | |
of (1)~(3), heading for the side of the |
|
spin tub. (See to Figure 3). |
|
Embed the drain hose into the |
|
groove with hands. Take care not | Extend to the |
to damage the drain hose in | spin tub side |
fastening the fixing clamp.
Figure 2
Figure 3
Embed into the groove in turn
Install the water inlet hose; Select the water level
Insert the water inlet hose into the |
| ||
entrance on the control panel |
|
|
|
To dismantle the water inlet pipe, |
|
| Water inlet hose |
just push the control handle as indicated in the |
| ||
figure and pull it out |
| Water level | Water inlet |
| indicator | ||
|
| ||
| Maximum | Max |
|
Select water level according to the |
| ||
|
| ||
quantity of the laundries. | Medium | Med |
|
Set the water level adjusting lever | Minimum | Min |
|
|
|
| |
to needed line. |
|
|
|
5
