Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Installation and adjustment

Voltage change

This washer is assembled for 220V, butcan be changed from 220V to 127V.
Check your electrical source and follow the diagram below to convert voltage.
Blue
Green
White
(1).
(2).
the safeguard bagto expose the connectors.
(4). Detachthe white connector from the green one(220V), then inlay it into the blue one(127V).
(5). Pack all the connectors withthe safeguard bag as usual and f Then install the backcover.
Above all the steps must be doneby the special serviceman.
Please first pull off the power plug and hang up the power cord.
Loosen the fastening screw and take off the back cover.
(3). Unknit
ix it.
Overflowfilter
Lintfilter

Install the lint filter

After opening the package, please take out the lint filter from the document bag, install it to the overflow filter of the wash tub. See to the figure.
4