Haier HWM80-27S user manual How to change the direction of the drain hoses

How to change the direction of the drain hoses

Figure 1 indicates the ex factory installation position of the drain hose.

Extend the drain hose from the side of spin tub.

Take off the drain hose from the hanging	Drain hose
hole of the cabinet. Pull the drain hose		Figure 1
	fixing hook
fixing hook outwards gently to take out

the	drain hose from the two fixing hooks.					Side sectional view
(As per Figure 2)
						Drain hose			Fixing hook
Rotate the drain hose fixing hook for 90						fixing hook			installation hole
									Drain hose
to take it out			from the installation hole			Pull outwards
(As per Figure 3).						slightly
						Take off				Figure 2
Install		the	two	drain hose		the drain hose
fixing		hooks taken out into
the installation				hole at the
other side of the base frame
(to	aim at the			installation	Rotate the fixing
hole		accurately		you can				Rotate the fixing
					hook for 90			hook for 90
lean		the washing machine							to fix it
forward slightly).Then rotate					Take off the fixing		Insert the fixing hook into the
for 90 (As per Figure 4).					hook downwards		installation hole upwards
Pull	the fixing hook outwards				slightly.	Figure 3				Figure 4
Inlay the drain hose into the fixing hooks
reliably along the groove at spin tub side,
and make it extend towards spin tub side.
Then hang the drain hose into the hanging
hole at the spin tub side. (As per Figure 5).
Extend the drain hose from the rear side										Figure 5

Take out the drain hose from the fixing hook. Extend it from the rear side (When

the drain hose is extended from the rear

side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6).

Figure 6

7