Trouble-shooting
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or
Phenomenan | The reason | How to settle | |
The drainage cannot work, or is too slow. | Is the drain hose blocked | Clean the foreign material. Push | |
The digitron displays E1 and it rings. | by foreign material? | the start button again. |
|
After washing and rinsing, it stops | The top lid is not closed. | Close the top lid. | |
running during spinning. The |
|
|
|
digitron displays E2 and it rings. |
|
|
|
The safety switch acts, and the spinning cannot work (after twice automatic imbalance revising). The digitron displays E3 and it rings.
Are the laundries put slantingly?
Is the machine slanting?
Reorder the laundries. Close the top lid. 
Set the washing machine horizontally and then open and close the top lid once.
The water inlet does not work, or is too slow (cannot reach the water level after about 30 minutes). The digitron displays E4 and it rings.
Is the water faucet opened,
or is there water supply failure? 
Is the water inlet valve blocked?
Open the water faucet. Push the Start/Pause button again.
Clean the water inlet valve then push the Start/Pause button again.
When you selected the function of
The water level sensor is abnormal that time the digital tube displays E6..
In. the process of function
of reserve ,opened the cover.
The terminal of water level
sensor. loosing..
Closing the cover.
Fix the water level sonor again..
The cascade current is poor or | Is there foreign material blocking | Clear the foreign material. | |
there's no cascade current. | the spray outlet? | ||
| |||
| Is there power failure? | Use it when the power is on. | |
No wash | Is the power plug loose? | Insert the power plug tightly. | |
The machine does | If water level reach the appoint level? | Affusion to appoint level. | |
not act. | Is the power plug loose? |
| |
| Insert the power plug tightly. | ||
No spin | Is the top lid is not closed.? | ||
Close the top lid | |||
| Are the laundries put | ||
| slantingly? | ||
| Close the top lid. | ||
|
| ||
There's abnormal sound | Is the machine slanting? | Level the machine properly. | |
inside the machine. | Are the laundries slanting | ||
| |||
| in spinning? |
|
The water faucet leaks.
No water inlet.
Is the jointer screw of the water inlet hose is loose or twisted awry?
Is the power plug plugged tightly? Is the water faucet opened?
Are the POWER ON/OFF and START/PAUSE buttons pushed down?
Fasten the jointer screw properly.
Plug the power plug tightly.
Open the water faucet.
Push the power ON/OFF button and START/PAUSE button.
