Haier HWM90-0713S user manual Trouble-shooting Answer to question, Disposal of the complete unit

Models: HWM90-0713S

1 18
Download 18 pages 60.06 Kb
Page 15
Image 15

Disposal of the complete unit

Wipe the complete unit with soft

cloth twisted dry.

Wipe with neutral detergent if too dirty.

Do not wash it directly by water.

Alcohol Petrol Thinner

After washing, dismount the water inlet hose.

Do not store water in the tub for long period. Discharge the water immediately after each using.

Pull off the power plug and hang up the power cord.

Hang up the drain hose.

Wipe off the water drops on the surface and inside the tub with clean soft cloth. Open the cover of the wash tub and the inner/outer cover of the spin tub for some time (about one hour), then close them.

Trouble-shooting Answer to question

If the laundries fall to the outer side of the spin tub

If the laundries fall to the outer side of the spin tub, please contact the after-sales service department.

When the remained water is frozen

Prevent the freezing (be sure to discharge the water completely after using)

After complete draining, set the "WASH SELECTOR" at "STRONG" or "STANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen water to melt.

When the water is frozen

Pour hot water below 50 into the wash tub to soak it completely. Then turn the pulsator with hands gently. Please confirm the drainage can work normally before next using.

Below 50 c 2~3L

13

Page 15
Image 15
Haier HWM90-0713S Trouble-shooting Answer to question, Disposal of the complete unit, When the remained water is frozen