Washing sequence
Wash timer
Water inlet | (To set to below 2 minute, |
| |
| first set to 6 minute then |
| turn it back. it can increase |
| the service life of the timer). |
Wash selector
(standard current, strong current)
Spin timer
(to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer).
STRONG
OFF | OFF |
15
12
3 | 5 |
| STANDARD |
| DRAIN |
6 | 4 |
9 | 3 |
9
1
2
WASH TIMER | WASH SELECTOR | SPIN TIMER |
Wash
1.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 1)
Run washing program for some time to stir and dissolve the powder completely.
STANDARD
2.Put in the laundries. If the water quantity is insufficient, please add water.
WASH SELECTOR
Figure 1
STRONG
DRAIN
3.Select the current.
Select the strength of the current according to the laundries. (Figure 2)
4.Select the washing time
Select the washing time according to the laundries. (Figure 3)
5.After washing, set the "WASH SELECTOR" at "DRAIN". (Figure 4).
Figure 2
| OFF | ||
15 |
|
| 3 |
|
| ||
12 |
|
| 6 |
|
|
|
|
9
WASH TIMER
Figure 3
STRONG
DRAIN
WASH SELECTOR
Figure 4
8
