Haier HWR05XCJ manual 1.ON/OFF, Timer

1.ON/OFF

To turn set ON, press the button. To turn set OFF, press the button again.

2.TIMER

Press TIMER button. For each press, TIMER mode will changes as follows:

TIMER ON TIMER OFF CANCEL

Timer On or Timer Off mode is used to pre-start or shut off your unit in advance. You can program this up to 24 hours in advance. You can use the Timer in both functions, i.e. Cool or Fan Only.

Timer On

The unit must be on to set the timer. Unit will shut down automatically after it accepts the settings in 5 seconds. Use this mode to pre-set the start time of the unit 24 hours in advance.

a)Press On . LED display will show "XX" (time set last time). When power is connected for the first time, LED display will show "01".

b)Set the desired number of hours by pressing the ( ) pad of the Temp/Time buttons, once for each hour. If you pass the desired time, use the ( ) pad key to lower the selection.

c)After you set Timer On, LED display will show the time. This time displayed means: the unit will starts after X hours.